Imagine, Create and Bathe In Luxury
Colour: Farrow & Ball Clunch
Over 10,000 paint colours to choose from and many other finishes available - View All Finishes.
Find my Nearest StockistA double ended cast iron bath with a vitreous enamel interior and painted exterior in a colour of your choice. The bath comes complete with dainty claw and ball feet and is available with or without tap holes.
| Length | 1700mm |
| Width | 750mm |
| Height | 580mm |
| Weight | 152.50kg |
| Capacity | 185.5 Litres |
| Material | Cast Iron |
| Download Specifications | |
| Download Fitting Instructions | |
| View Detailed Line Drawing |
| With Tap Holes | TBK005 |
| Without Tap Holes | TBK036 |
| Bath Feet - Painted | TBK012 |
| Bath Feet - Chrome | TBK013 |
Use a solution of soapy water and apply with a soft cloth or sponge in a brushing motion. Do not use wire brushes, steel wool & abrasive sponge pads. Rinse thoroughly with water immediately after the application of cleaners and wipe the surface leaving it completely dry after the process.
Do not allow cleaners to sit or soak on the surface and avoid dripping taps.
It is important not to use acidic cleaners or sprays as this will affect the surface of the bath and may result in small brown particles building up on the enamel surface or staining.
At Hurlingham we believe that you should never have to settle or compromise but rather your bath should be an extension of your individual décor decisions. That is why we offer our customers a custom paint finish. We can replicate any paint hue including all of the Farrow and Ball range. Also you can choose from a full selection of liquid metal paint finishes.
For those more unusual selections all we need is a physical sample and we will transform your bath into the stand out item you desire in no time at all!
Choose from a selection of rich high quality leathers in a number of warm finishes to either create a full surround or a luxurious rim. Either one will create a beautiful bath which will be an attractive centre piece for any bathroom!
We cut the leather to the individual baths template (4 pieces in total) with each seam being stitched. Prior to fitting the leather the bath is sanded down to the smoothest possible finish to ensure there are no blemishes in the final finish. Once satisfied a first stage glue is applied to the bath and left to set. We then stretch the leather and apply the second stage of glue before bonding the leather to the bath itself which is then left to dry.
Only when the craftsman is fully satisfied the bath will have the final stage of water proofing spray applied which is repeated three times to fully protect the bath. This final process allows the bath to be used as much as desired without worrying about any damage occurring to the leather.
First we take a swatch of the material to ensure it is of a high enough quality to undergo the fitting and water proofing process. Once approved the cloth is transferred to the cutting table in preparation of creating the perfect templates for the bath. Aspects that need to be taken into consideration are the pile of the fabric and the best direction to have it applied to the bath. Also the pattern will need to be taken into account and a template created which best highlights the design.
Once we are happy we have the best possible templates we carefully cut out the various pieces. A heat proof adhesive is applied to both the bath and the fabric and the material is rolled into place and pressure applied to smooth out any imperfections or air bubbles. Throughout the entire process particular care is taken to ensure all seam lines are perfect. Finally three coats of a special water proofing spray are applied. This gives the bath a fully waterproofed exterior allowing it to be used just like any other item within the bathroom.
Our Hand Gilded service offers you a most unique and opulent finish. From a selection of real of faux gold, copper, pewter and bronze leaf, we give you the opportunity to create one of the most lavish and bespoke baths available, elevating the design of your bathroom to new heights.
The hand gilding of baths is a highly skilled process carried out over several phases. Several different leaf finishes are available, all of which can be bespoke to your requirements. Customers are welcome to meet our gilders to discuss their design objectives.
If a variegated leaf or paint finish is chosen, a completely random and irregular effect can be expected.
